-
(R31S086)GRK φ3.0サスピン用サスボール 4個
¥660
・(R31S084) GRK φ3.0コンバートサスピン (52.5mm) 2本入り ・(R31S085) GRK φ3.0コンバートサスピン (49.0mm) 2本入り のφ3.0サスピンに対応するサスボールです。 弊社製アルミサスマウント装着車でφ3.0穴のロアアームを使用させる際にご利用ください。
-
(R31S085) GRK φ3.0コンバートサスピン (49.0mm) 2本入り
¥550
φ3.0穴のロアアームへ変更時に対応するGRK用サスピンです。 サスピン全長が49.0mmとなり、GRK4/5のリアに対応します。 同時発売となります(R31S086)GRK φ3.0サスピン用サスボールと、同サスピン径に対応するスペーサーを組み合わせてご利用ください。 ※弊社のアルミ製サスマウント装着車に対応致します。 GRKグローバルシリーズ標準の樹脂製サスマウントには装着できない為ご注意ください。 (R31S085) GRK φ3.0 suspension pin (49.0mm) 2 pieces This is a lower arm shaft developed to accommodate the use of other companies' φ3.0 hole diameter lower arms for GRK. The total length is 49.0mm. The rear and length of GRK4 & GRK5 are the same. Please use it in combination with the GRK φ3.0 suspension ball (R31S086), which is also on sale at the same time, and a spacer that corresponds to the same suspension pin diameter
-
(R31S084) GRK φ3.0コンバートサスピン (52.5mm) 2本入り
¥550
φ3.0穴のロアアームへ変更時に対応するGRK用サスピンです。 サスピン全長が52.5mmとなり GRKグローバルシリーズ(※)とGRK4/5のフロントに対応します。 同時発売となります(R31S086)GRK φ3.0サスピン用サスボールと、同サスピン径に対応するスペーサーを組み合わせてご利用ください。 ※弊社のアルミ製サスマウント装着車に対応致します。 GRKグローバルシリーズ標準の樹脂製サスマウントには装着できない為ご注意ください。 (R31S084) GRK φ3.0 suspension pin (52.5mm) 2 pieces This is a lower arm shaft developed to accommodate the use of other companies' φ3.0 hole diameter lower arms for GRK. The total length is 52.5mm. This is the same front and length as the GRK Global Series and GRK4 & GRK5. Please use it in combination with the GRK φ3.0 suspension ball (R31S086), which is also on sale at the same time, and a spacer that corresponds to the same suspension pin diameter. It cannot be installed on the GRK Global Series resin suspension mount.
-
(R31S080LR)SHIBATAドリフトスプリング 6.5左右巻き(線間密着タイプ)
¥880
ご好評いただいている⚡SHIBATA⚡ DRIFT SPRINGシリーズに 新たに6.5左右巻き(線間密着タイプ)が登場! 幾度となくテストを繰り返し導き出した本スプリングは 高いフロントトレース能力とリアトラクション性能の両立を実現。 コンペティションシーンでの使用を想定し リア軸重のあるマシンのリアスプリングとしても最適です。 〇バネ仕様 ・バネ長…26mm ・バネ線径…1.4mm ・巻き数…6.5左右巻き(線間密着タイプ) (R31S080LR) SHIBATA drift spring 6.5 left and right winding (line contact type) ⚡SHIBATA⚡ DRIFT SPRING series A new 6.5 left-right winding (line-to-line contact type) is now available! This spring has been developed through repeated tests. Achieves both high front tracing ability and rear traction performance. Intended for use in competition scenes. It is also ideal as a rear spring for machines with rear axle loads. 〇Spring specifications ・Spring length…26mm ・Spring wire diameter…1.4mm ・Number of windings…6.5 left and right winding (line-to-line close contact type)
-
(R31S079) GRKスプリングホルダー±0 2個入り 各色
¥2,624
「SHIBATA ドリフトスプリング」シリーズの性能を引き出すため スプリングのホールド性を高めた形状を採用。 スプリングポジションは、幅広いスプリングにマッチしやすい 標準スプリングホルダーと同じ「±0」となります。 ブラック・レッド・パープルの3色をご用意しました。 〇内容物 ・GRKスプリングホルダー±0 ×2 (R31S079) GRK spring holder ±0 2 pieces each color To bring out the performance of the "SHIBATA Drift Spring" series Adopts a shape that enhances the spring holdability. Spring position is easy to match with a wide range of springs The same "±0" as the standard spring holder. Available in 3 colors: black, red, and purple. 〇Contents ・GRK spring holder ±0 ×2
-
(R31S075)GRK SLFピロボールML 6個入り
¥880
(R31M129)GRKピロボールSLから取付部ネジ長さを約2.5mm延長した 新形状のφ4.3ピロボールです。 装着できるスペーサーの厚みが増えたことで アームジオメトリーセッティングの幅が広がります。 素材とボール先端部の形状を見直したことで ピロボール取り付け部のフィリクション低下も期待できます。 〇ピロボール仕様 ・ピロボール径…φ4.3 ・ネジ径×長さ…M3×7mm ・ピロボール高さ(取付面~ピロボール中心)…約6.5mm (R31S075)GRK SLF Pillow Ball ML 6 pieces (R31M129) The length of the mounting screw has been extended by approximately 2.5 mm from GRK Pillow Ball SL. Newly shaped φ4.3 pillow ball. Due to the increased thickness of the spacer that can be installed The range of arm geometry settings is expanded. By reviewing the material and the shape of the ball tip, You can also expect a reduction in friction at the pillow ball attachment part. 〇 Pillow ball specification ・Pillow ball diameter…φ4.3 ・Screw diameter x length…M3 x 7mm ・Pillow ball height (mounting surface to center of pillow ball)…approx. 6.5 mm
-
(DR-B3800C)SHIBATA DR ハイパフォーマンスバッテリー
¥6,820
〇商品説明 ⚡SHIBATA⚡独自の内部セルを採用したドリフト用バッテリーの誕生です。 HITEC社の協力により、厳選した数種類のセルの中から度重なるテストを繰り返し、ドリフトシーンに適した出力特性を持つセルを選びました。 パワーバンドの広さ、スロットルに対するスムーズなツキの良さなど、⚡SHIBATA⚡ハイパフォーマンスバッテリーの名にふさわしいドリフト用バッテリーです。 〇バッテリースペック 容量…3800㎜mAh 放電レ―ト…110C(瞬間最大220C) バッテリーサイズ…18.5㎜×47㎜×93㎜ PSE技術基準適合製品(電気用品安全法) (2022年11月30日追記) 製造コストの高騰による、価格改正を行いました。 ※DR-B3800Cには充電機用変換コネクター(T型プラグ→ピンコネクター)が付属しています。
-
(DR-CFC30) SHIBATA アルミクーリング ファンカバー (各色)
¥1,210
大変好評いただいている 【DR-ACF30BK】に対応するアルミクーリングファンカバーが登場! SHIBATAのトレードマークである稲妻形状の穴が映える本製品は ファン本体の保護としてだけでなくドレスアップパーツとしても最適です。 艶消しブラック・艶有りレッド・艶有りパープルの3色をご用意しました。 カバー外寸…30mm×30mm×2mm 取付穴寸法…24mm×24mm(φ3取付穴) (DR-CFC30) SHIBATA aluminum cooling fan cover (various colors) Aluminum cooling fan cover compatible with [DR-ACF30BK]. This product, which features SHIBATA's trademark lightning-shaped hole, is ideal not only for protecting the fan itself, but also as a dress-up part. Available in 3 colors: matte black, glossy red, and glossy purple. Cover outer dimensions…30mm x 30mm x 2mm Mounting hole dimensions...24mm x 24mm (φ3 mounting hole)
-
(DR-LB001) SHIBATA MOTOR SPORT Lipoバッグ
¥2,420
大変ご好評いただいていたLi-poバッグが 新たなデザインで登場! ブラックを基調とした光沢のあるベース本体はそのままに 新規ロゴとなる「SHIBATA MOTOR SPORT」へ変更し R23シバタイヤのパターンを追加する事で よりレーシーさを演出します。 バッグ内寸はロングタイプリポバッテリーも収まる 長さ190㎜×幅75㎜×高さ60㎜ 【DR-B3800】SHIBATA DRハイパフォーマンスバッテリーの場合 最大で6本の保管が可能です。 ※本製品には難燃性素材を使用しておりますが、これは発火初期における 引火や延焼を抑えるための物であり、すべての被害を防ぐものではありません。 バッテリーを充電する際は、必ず各機器の説明書に従い 充電中はバッテリーから目を離さないようにしてください。 (DR-LB001) SHIBATA MOTOR SPORT Lipo bag We have renewed the Li-po bag, which has been very popular. The glossy black base body remains the same, but the new logo has been changed to "SHIBATA MOTOR SPORT." Adding the R23 Shiba tire pattern creates a more racy look. The inside dimensions of the bag are 190mm long x 75mm wide x 60mm high, which can also accommodate long type lipo batteries. *This product uses flame-retardant material, but this is not suitable for the initial stage of ignition. This is to prevent fire from igniting or spreading, but does not prevent all damage. When charging the battery, be sure to follow the instructions for each device. Do not leave the battery unattended while charging.
-
(DR-PM001) SHIBATA MOTOR SPORT ピットマット
¥3,300
⚡SHIBATA⚡MOTOR SPORTから オリジナルデザインのピットマットが登場! カーボン調マットに施された ホワイトプリントのロゴとR23シバタイヤのタイヤパターンが レーシーな作業スペースを演出します。 巻いたまま固定が出来る保管用バンドも付属。 様々なピットシーンに対応しやすい900mm×430mmのコンパクトサイズ (DR-PM001) SHIBATA MOTOR SPORT Pit Mat From ⚡SHIBATA⚡MOTOR SPORT Introducing an original designed pit mat! Made on carbon-like matte White printed logo and R23 Shiba tire pattern Creates a lacy work space. A storage band is also included that can be fixed while rolled. 900mm x 430mm, easy to accommodate various pit scenes
-
(R31S070) DR 高粘度ベアリングオイル
¥1,980
〇商品説明 高回転&高負荷状態にさらされるベアリングの寿命とパフォーマンスを 維持するのに最適で、飛散しにくい高粘度タイプベアリングオイルです。 モーター内部のベアリングや、駆動部品のベアリングの メンテナンスや、グリスアップに最適です。 注油作業時に取り回しやすい金属製細長ノズル付き 内容量…10ml (R31S070) DR High viscosity bearing oil 〇Product description Improves the lifespan and performance of bearings exposed to high rotation and high load conditions. A high viscosity type bearing oil that is ideal for maintenance and does not easily scatter. Bearings inside the motor and bearings of drive parts Ideal for maintenance and greasing. Comes with an elongated metal nozzle that is easy to handle during lubrication work. Contents…10ml
-
(R31S065)GRK4/5ステアリングラックユニット用OPベアリング
¥495
〇商品説明 GRK4/GRK5に採用しているステアリングラックシステムに対応する オプションベアリングです。 ステアリングラックに装着されている940ベアリングの後方側を 本製品に変更する事で、ステアリングラックの動作をスムーズにするだけでなく 取付調整部のゆるみの低減やラック本体のダメージを抑制する効果が期待できます。 1個入りでの販売となります。 適応車種 ・GRK4 ・GRK5 ・(R31S317)GRK4ステアリングラックユニット装着車 (R31S065) OP bearing for GRK4/5 steering rack unit 〇Product description Compatible with the steering rack system used in GRK4/GRK5 Optional bearing. The rear side of the 940 bearing installed on the steering rack By changing to this product, you can not only make the operation of the steering rack smoother but also It can be expected to reduce the loosening of the mounting adjustment part and prevent damage to the rack body. Sold in 1 piece. Applicable car models ・GRK4 ・GRK5 ・(R31S317) Vehicle equipped with GRK4 steering rack unit
-
(DR-ES34BK)アルミエクステンションスペーサー 34mm ブラック 2個入り
¥825
様々な用途で使用できるアルミ製延長スペーサー(全長34mm)です。 ダンパー取付位置やバッテリーマウントプレートの高さの変更等 アルミスペーサー単体では難しい大幅な延長を可能にします。 スペーサーの追加や取り付けたい場所によって変化する最適なネジのかかりしろを ビスの種類や長さを変える事で柔軟に対応できるよう、両側メスネジとなっています。 2本入りでの販売となります。 ※本製品は(R31S002)GRK4アッパーデッキポスト 34㎜の価格改正品となります。 シャフト最大径(両端部)…約6mm ネジ穴径…M3
-
(DR-ES22BK)アルミエクステンションスペーサー 22mm ブラック 2個入り
¥770
SOLD OUT
様々な用途で使用できるアルミ製延長スペーサー(全長22mm)です。 ダンパー取付位置やバッテリーマウントプレートの高さの変更等 アルミスペーサー単体では難しい大幅な延長を可能にします。 スペーサーの追加や取り付けたい場所によって変化する最適なネジのかかりしろを ビスの種類や長さを変える事で柔軟に対応できるよう、両側メスネジとなっています。 2本入りでの販売となります。 シャフト最大径(両端部)…約6mm ネジ穴径…M3
-
(DR-ES18BK)アルミエクステンションスペーサー 18mm ブラック 2個入り
¥715
様々な用途で使用できるアルミ製延長スペーサー(全長18mm)です。 ダンパー取付位置やバッテリーマウントプレートの高さの変更等 アルミスペーサー単体では難しい大幅な延長を可能にします。 スペーサーの追加や取り付けたい場所によって変化する最適なネジのかかりしろを ビスの種類や長さを変える事で柔軟に対応できるよう、両側メスネジとなっています。 固定作業時の作業性を考慮してスペーサー端面を工具がかけれるよう形状を工夫しました。 2本入りでの販売となります。 シャフト最大径(両端部)…約6mm ネジ穴径…M3
-
(DR-ES10BK)アルミエクステンションスペーサー 10mm ブラック 2個入り
¥660
様々な用途で使用できるアルミ製延長スペーサー(全長10mm)です。 ダンパー取付位置やバッテリーマウントプレートの高さの変更等 アルミスペーサー単体では難しい大幅な延長を可能にします。 スペーサーの追加や取り付けたい場所によって変化する最適なネジのかかりしろを ビスの種類や長さを変える事で柔軟に対応できるよう、両側メスネジとなっています。 固定作業時の作業性を考慮してスペーサー端面を工具がかけれるよう形状を工夫しました。 2本入りでの販売となります。 シャフト最大径(両端部)…約6mm ネジ穴径…M3
-
SHIBATA DRダンパーオイル 各種
¥1,628
〇商品説明 「⚡SHIBATA⚡ DR」ブランドから ご要望が多かったオリジナルダンパーオイルがついに登場! テスト走行を繰り返し導き出した オリジナルブレンドの鉱物油製ダンパーオイルは ドリフト走行に最適なリニアさと、安定した減衰特性を実現。 路面状況やスプリング特性に柔軟に対応できるよう 5番(ソフト)… R31S048 15番(ミディアム)… R31S049 25番(ハード)… R31S050 35番(スーパーハード)… R31S058 の計4種類をご用意しました。 〇商品情報 内容量…45ml
-
(R31W422)SHIBATA DRIFT RACING TEAM キャリーバッグ
¥15,950
SOLD OUT
※画像は組み立てたサンプル画像を使用しています。 〇商品説明 シックなブラックをベースに、ホワイトの「SHIBATA DRIFT RECING TEAM」のロゴとステッチが映える、1/10サイズRCカー対応キャリーバッグの登場です!! 中身が取り出しやすい引き出しタイプを採用。 内箱は引き出しに便利な、取っ手付きのプラスチック製段ボールを使用。 手提げ・肩掛け兼用で、底面には水や泥に強い加工を施しています。 〇各寸法 ・バックサイズ…510mm×300mm×290mm ・内箱サイズ…490mm×255mm×120mm(2個入り) (R31W422) SHIBATA DRIFT RACING TEAM carry bag Introducing a carry bag for 1/10 size RC cars with chic black base and white "SHIBATA DRIFT RECING TEAM" logo and stitching! Uses a drawer type that makes it easy to take out the contents. The inner box uses plastic cardboard with a handle that is convenient for drawers. It can be used as a handbag or shoulder bag, and the bottom is treated to be resistant to water and mud. 〇Each dimension ・Back size…510mm×300mm×290mm ・Inner box size…490mm×255mm×120mm (2 pieces included)
-
(R31W418)SHIBATA ターンバックルレンチ (4mm/5.5mm)
¥1,375
〇商品説明 大変ご好評いただいておりましたターンバックルレンチがリニューアル! レンチ部の材質を変更、および先端部の形状を変更。 これにより耐久性と扱い易さが向上致しました。 使用頻度が高い4mmレンチ側には、5.5mm側と見分けやすくなるように2本の切削加工を施してあります。 本体は高級感あふれるブラックアルマイト仕上げ 「SHIBATA」ロゴ、4.0mmと5.5mmのマーキング付き (R31W418) SHIBATA Turnbuckle Wrench (4mm/5.5mm) Changed the material of the wrench part and changed the shape of the tip. This improves durability and ease of handling. The 4mm wrench side, which is frequently used, has been machined to make it easier to distinguish from the 5.5mm side. The body has a luxurious black anodized finish. "SHIBATA" logo with 4.0mm and 5.5mm markings
-
(R31S046)SHIBATA Gear Grease
¥1,100
ベベルギアを始め、ユニバーサルシャフトのジョイント部など 幅広く使用可能な⚡SHIBATA⚡オリジナルギアグリスです。 メンテナンスの際は必須のアイテムです。 〇内容量 約5g (R31S046) SHIBATA Gear Grease Bevel gears, universal shaft joints, etc. Widely usable ⚡SHIBATA⚡ original gear grease. It is an essential item for maintenance. 〇Inner capacity about 5g
-
(DR-ACF30BK)SHIBATA DR アルミクーリングファン
¥4,180
〇商品説明 「⚡SHIBATA⚡DR」ブランドからご要望の多かったオリジナルクーリングファンがついに登場! 「⚡SHIBATA⚡DR」ロゴがあしらわれた本体は冷却効果の高いアルミ製を採用。 強力な風量を生み出すファン中心部にはSHIBATAのトレードマークである稲妻ロゴを設けました。 〇商品仕様 本体サイズ:縦30㎜×幅30㎜×高さ10㎜(取付穴寸法約24㎜×24㎜) ケーブル長:約160mm(BECタイプ) 〇内容品 ・ファン本体×1 ・シャーシ本体固定用両面テープ×1 ・M2.6×5㎜キャップビス×4 (DR-ACF30BK) SHIBATA DR aluminum cooling fan The body with the "⚡SHIBATA⚡DR" logo is made of aluminum with a high cooling effect. SHIBATA's trademark lightning bolt logo is placed in the center of the fan, which produces powerful airflow. 〇 Product specifications Body size: Length 30mm x Width 30mm x Height 10mm (Mounting hole dimensions approx. 24mm x 24mm) Cable length: about 160mm (BEC type) 〇 Contents ・Fan body x 1 ・ Double-sided tape for fixing chassis body x 1 ・M2.6 x 5 mm cap screw x 4
-
(DR-HPM)SHIBATA DR ハイパフォーマンスモーター
¥17,380
〇商品説明 「⚡SHIBATA⚡プレミアムシリーズ」からSHIBATA DR ハイパフォーマンス ブラシレスモーターの登場です!! 滑らかなスロットルフィールを実現する最新ステーターを採用。 ⚡SHIBATA⚡DRIFT RACING TEAMのロゴが入ったモーターケースは大胆な2ピース構造を採用し、冷却性能に優れています。 〇推奨路面 ・10.5T…アスファルト路面やカーペット路面などに適しています。 ・13.5T/15.5T…Pタイルやカラーコンクリートなど、グリップが低めの路面に適しています。 〇主要緒言 ・対応電圧:3.7V~8.4V ・最高回転数:27,942RPM(10.5T)/22,123RPM(13.5T)/18,900RPM(15.5T) ・KV値:3,987(10.5T)/3,182(13.5T)/2,700(15.5T) ・ローター径:12.3mm ・進角:40° 〇内容物 ・モーター本体 ・センサーコード(配線長…約150㎜) (DR-HPM) SHIBATA DR high performance motor Adopts the latest stator that realizes smooth throttle feel. The motor case with the ⚡SHIBATA⚡DRIFT RACING TEAM logo adopts a bold 2-piece structure and has excellent cooling performance. 〇Recommended road surface ・10.5T: Suitable for asphalt and carpet roads. ・13.5T/15.5T…Suitable for surfaces with low grip such as P tiles and colored concrete. 〇 Main introduction ・Corresponding voltage: 3.7V to 8.4V ・Maximum RPM: 27,942RPM (10.5T)/22,123RPM (13.5T)/18,900RPM (15.5T) ・KV value: 3,987 (10.5T) / 3,182 (13.5T) / 2,700 (15.5T) ・Rotor diameter: 12.3mm ・Advance angle: 40° 〇 Contents ・Motor body ・Sensor cord (wiring length: about 150 mm)
-
(R31S031)SHIBATA レーシングホイールナット 4個入り 各色
¥605
SOLD OUT
※画像は一部装着イメージ画像を使用しています。(ホイールナット以外の商品は含まれておりません) 〇適応シャーシ ALL GRK(M4ネジのアクスルに対応) 〇商品説明 SHIBATAプレミアムシリーズからレーシングホイールナットの登場です! セレート付きフランジタイプを採用。 アルミ製にすることでバネ下重量を軽くする事ができ、アクセル操作に対する追従性が向上。 アルマイトカラーはブラック・レッド・パープルの3種類をご用意しました (R31S031) SHIBATA Racing Wheel Nuts 4pcs each color *Some of the images are used for wearing images. (Products other than wheel nuts are not included) 〇 Applicable chassis ALL GRK (compatible with M4 screw axle) 〇 commodity explanation Introducing the racing wheel nut from the SHIBATA premium series! Uses a flange type with serrations. By making it made of aluminum, the unsprung weight can be reduced, and the followability to accelerator operation is improved. Three types of alumite colors are available: black, red, and purple.
-
(R31S045)SHIBATA ウェイトトランスファースプリング 45mm
¥825
〇商品説明 ⚡SHIBATA⚡プレミアムシリーズより SHIBATAウェイトトランスファー(荷重移動)スプリングが新登場! 度重なるテストを繰り返し、ロールスピードの適正化と、荷重移動コントロールの楽しさを追求。 バネ鋼の材質に拘り、反発の少ない素材を選びました。 別売りの【R31S042】ウェイトトランスファー バッテリーベースプレートと組み合わせる事でより荷重コントロールを楽しんで頂く事が可能となります。 〇スプリング仕様 バネ巻数…13.5巻き バネ線径…1.1㎜ 全長…45㎜ 本製品は2個入りとなります。 (R31S045) SHIBATA weight transfer spring 45mm 2 pieces 〇 commodity explanation After repeated tests, we pursued the optimization of roll speed and the enjoyment of load transfer control. We chose a material with little repulsion, sticking to the material of the spring steel. Combined with the separately sold [R31S042] weight transfer battery base plate, you can enjoy more load control. 〇 Spring specifications Number of spring turns: 13.5 turns Spring wire diameter…1.1mm Overall length…45mm